777米奇色8888狠狠俺去了,米奇欧美777四色影视在线,狠狠色噜噜狠狠狠狠米奇777

  • <label id="zuwts"></label><tbody id="zuwts"><pre id="zuwts"></pre></tbody>

        <nav id="zuwts"><center id="zuwts"></center></nav>
      1. L400E

        Specifications

        Capacity Swing over Bed Ø520 mm
        Max. Processing Dia. Ø410 mm
        Max. Processing Length 1100 mm
        Reciprocating Table Traverse X Axis 230 ( 205+25 ) mm
        Z Axis 1144 mm
        Spindle Spindle Speed 3000 min-1 (rpm)
        Speed Range Two Steps, Stepless Speed
        Spindle Nose JIS A2-8
        Spindle Bore Ø80mm
        Dia. of Front Spindle Bearing Ø120 mm
        Tool Turret Type NC V8
        Tool Holder Number 8
        O.D. Tool Holder Size 25 x 25 mm
        I.D. Tool Holder Dia. Ø40 mm
        Tool Change Time 0.3 sec
        Feeding Speed Rapid Traverse (X, Z ) X / Z:20 m / min
        Feeding Rate (X,Z,Y) 0.001 ~ 1000.000 mm / rev
        Tailstock 尾座心押軸直徑 Ø90 mm
        Tapered Bore of Sleeves MT.4 (Active Lathe Center)
        心押軸行程 100 mm
        Motor Main Spindle (30 minutes/ continual) VAC15 / 11 kw
        X Axis 3.0 kw
        Z Axis 3.5 kw
        Cutting Liquid Pump 0.25 kw
        Machine Sizes Machine Height 1934 mm
        Covering area 3537 x 2155 mm
        Machine Weight 6000 kg
        CNC Controller   OSP-P300L-R

        Accessories

        Standard Closed Center Hydraulic Chuck Set 10" ST
        Standard Soft Jaws A 3 3pcs / ST
        Standard Hard Jaws 1 3pcs / ST
        Lathe Center MT No.4 ST
        O.D. Tool Post I (STD, MW) 3 ST
        Face Turning Tool Post II (STD, MW) 1 ST
        O.D. Tool Post A (-M, MY)  
        O.D. Tool Post B (-M, MY)  
        O.D. Tool Post C (-M, MY)  
        I.D. Tool Post H40 (STD, MW/Main Spindle) 4 ST
        I.D. Tool Post H40 (MW, Secondary Spindle)  
        I.D. Tool Post H40 (-M, MY)  
        Boring Tool Sleeve 10-H40 2 PC
        Boring Tool Sleeve 12-H40 2 PC
        Boring Tool Sleeve 16-H40 2 PC
        Boring Tool Sleeve 20-H40 2 PC
        Boring Tool Sleeve 25-H40 2 PC
        Boring Tool Sleeve 32-H40 2 PC
        Drill Sleeve MT2-H40 1 PC
        Drill Sleeve MT3-H40 1 PC
        Drill Sleeve MT2-H40 (-M, MY, MW)  
        Lateral Drilling/ Power Milling Tool Post  
        Front Drilling/ Power Milling Tool Post  
        Bolt Head  
        VDI Tool System -
         
        Optional Specification Spindle Speed 3800 min-1 (A2-6)
        2200 min-1 (Ø140)
        Tool Turret V12 (NC)
        Hydraulic Power Chuck 10", 12" Closed center chuck
        12" Vacuum chuck
        Automatic On/ Off Inspection of Chuck MW, MYW Standard Specification
        Chuck Clamp Inspection  
        Chuck Pressure Switch (High/ Low) Release and clamp chuck
        主軸內工件定位器  
        Tool Setter M (Manual)
        Automatic Tailstock Mandrel  
        Lathe Center Force Selection (High/ Low)  
        Secondary Spindle Workpiece Ejector Only MW and MYW are Equipped with
        Steady Rest Only L400E and L300E-M are Equipped with
        Cutting Liquid Pump (High Pressure) 0.8 kw
        Coolant Through Spindle  
        Oil Mist Collector  
        切削液污泥防護 Oil water separator
        External water tank
        Iron Chip Conveyor Side, Back/ Low, High (L400E Without the Specifications below)
        Iron Chip Truck  
        吹氣裝置 Chuck Inflation (MW, MYW Standard Specification)
        Turret Inflation
        Spindle Center Inflation
        Lathe Center Inflation
        Automatic Door  
        Bar Feeder  
        Workpiece Receiver  
        Finished Product Conveyor  
        自動上下送料??機  

        Back
        Back

        Top
        Top

        777米奇色8888狠狠俺去了,米奇欧美777四色影视在线,狠狠色噜噜狠狠狠狠米奇777